Chapter 16 Completing the initial installation (optional) 151
BCM50 Installation and Maintenance Guide
Keycodes are required for the expansion ports to function. If you purchase a keycode for one
expansion port only, the expansion port on the left (expansion/LAN port 2) is active.
Therefore, Expansion 1 must be connected to the active port (expansion/LAN port 2). Refer to
Figure 42 on page 98 and Figure 43 on page 99 for location of the LAN ports.
5 Double-click the module type field to display the dropdown list.
6 Select the MBM that you installed in the expansion unit.
7 Click Enable.
8 If you installed a second expansion unit, repeat steps 3 to 6 to enable the second MBM.
Refer to the BCM50 Telset Administration Guide (N0027176) for information on configuring the
MBM using Telset Administration.
Configuring modem settings
Your system modem is either enabled or disabled, depending on the configuration you chose
during your basic configuration. If you plan on using the modem for management tasks, you can
customize its settings, including dial-in and dial-out settings, depending on your specific needs.
Refer to the BCM50 Networking Configuration Guide (N0027156) for information on configuring
the modem.
Checking for software updates
Nortel frequently updates the BCM50 software. Therefore, a standard part of any installation is to
ensure your system has the latest version of the software.
Refer to the BCM50 Administration Guide (N0016868) for information on checking for and
installing software updates.
Configuring voice mail
Your voice mail system was initialized during the basic configuration of your BCM50 system.
You must still configure your voice mail to take advantage of the many feature available.
If you need to perform further configuration tasks, refer to the documentation for your voice mail
system.
Refer to the CallPilot Manager Set Up and Operation Guide for information on using the
web-based interface to configure your voice mail system, or the CallPilot Telephone
Administation Guide for information on using Telset Administration to configure your voice mail
system.
