Filter
Top Products
Z 7 Tr e a d m i l l O w n e r ' s G u i d e
64
CARE AND MAINTENANCE
Your TRUE Z-Series treadmill is equipped with built in diagnostic capabili-
ties to assist in configuring, maintaining and servicing your treadmill. e
Field Diagnostic mode provides total hours, distance, average speed, ability
to change the units of measure, ability to set the “user not present” func-
tion, a list of service and error codes, the ability to set program time, and a
log of the last five errors.
NOTE: Messages appear in the Message Center on the Z7.
1. Hold the (minus/plus) while placing the Safety Key on the Keyboard.
e following messages will repeat themselves:
DIAGNOSTIC
PRESS START
2. Press (up arrow) to display total hours.
e following messages will display:
HOURS No. of hours on the treadmill
3. Press (up arrow) to display total distance.
e following messages will display:
DISTANCE No. of miles on the treadmill
4. Press (up arrow) to display average speed.
e following messages will display:
AVG SPEED Average speed on the treadmill
5. Press (up arrow) to display units. Press (plus) or (minus) to toggle.
e following messages will display:
UNITS ENG or MET
DIAGNOSTICS
Diagnostics
CARE AND MAINTENANCE