Filter
Top Products
Z 7 Tr e a d m i l l O w n e r ' s G u i d e
61
CARE AND MAINTENANCE
e Incline and Speed Calibration mode is used to troubleshoot and cali-
brate the treadmill. Calibration will cause the treadmill to speed up to 15
mph and incline up to 15%.
CAUTION: Keep area under the treadmill free from obstructions because
the deck returns to 0% grade when the safety key is replaced. Failure to do so
could cause personal injury or damage to the machine.
NOTE:
Messages appear in the Message Center on the Z7.
1. Hold (up/down) while placing the SAFETY KEY onto the Keyboard to
enter the Calibration Mode.
e following messages will repeat themselves one at a time:
CALIBRATION
PRESS START
NOTE: While in this mode, (up/down) and (plus/minus) can be used to
change the treadmill incline and speed. e SPEED Window will display
actual speed.
2. Press (Start) to start calibration.
e treadmill will lower to zero incline and then start increasing incline to
15% and speed to 15 mph.
3. When the calibration is complete:
e following message will display in the Message Center:
CALIBRATION SUCCESSFUL
Calibration
CARE AND MAINTENANCE
INCLINE
AND SPEED
CALIBRATION