Filter
Top Products
Page 62
4. Remove the Poly-V belt. Inspect the belt for wear. Replace the belt if it is
cracked, worn, torn, or cut.
5. Remove the alternator adjustment bolt (See Drawing on Pg. 51).
6. Remove the nut, bolt and mounting hardware from the alternator bracket.
Remove the alternator from the frame.
7. Reinstall the alternator by reversing the removal procedures. Be sure to
verify the wiring connections.
8. Ensure the Poly-V belt is tensioned correctly (See Drawing Below).
RELAY/RESISTOR ASSEMBLY
1. Remove the left side cover.
2. Remove the step positioned in the middle of the staircase.
3. Remove the wiring from the alternator terminals, noting the origin and color
of the wires that are removed from each terminal.
4. Unplug the main cable connector from the J1 position on the relay circuit
board.
PARTS REMOVAL AND REPLACEMENT