Filter
Top Products
Page 30
Quick Scan Programming
You can quickly access any of the custom menus by pressing
[LEVEL: ^],
[4], [ENTER]. The console will then display “MACHINE STATUS.” Scroll through
the following options:
[ SELECT ] “ RUN HOURS XXXX” 0
[ SELECT ] “ WORKOUTS XXXX” 1
[ SELECT ] “ DISTANCE XXXX” 2
[ SELECT ] “ CONS 90211- XXX ” 3
[ SELECT ] “ STEPMILL” 4
[ SELECT ] -N/A-
[ SELECT ] “ MAINT HOURS xxxx” 6
Resetting the Maintenance Hour Counter
For ease of maintenance records, the Stepmill
®
console has a maintenance timer
that will clock the number of hours, workouts, and time between last servicing.
After each maintenance period reset the counter.
[ ^ ] [ 7 ] [ 1 ] Reset Service
1. Reset the maintenance hour counter by pressing [LEVEL: ^], [7], [1]. The
console will dusplay “RESET SERVICE.” Press [ENTER]. The console will
display “DONE.” Press [CLEAR] to return to the starting screen.
Configuration Code
The Stepmill console supports other StairMaster
®
exercise systems. It is
important to verify that the machine configuration code matches the type of
machine you have. Speed control problems, along with other problems, can occur
if the console is not set up correctly.
[ ^ ] [ 8 ] [ 0 ] Change Machine
1. Change the machine type by pressing [LEVEL: ^], [8], [0]. The console will
display “CHANGE MACHINE.” Press [ENTER]. The console will then display
the current machine type. Use the [SELECT] key to toggle between
options. Press [ENTER] for the desired option.
7000 PT CONSOLE