Filter
Top Products
Page 3
INSTALLATION INSTRUCTIONS
Before leaving the manufacturing facility in Tulsa, Oklahoma, your StairMaster
®
Stepmill
®
7000 PT exercise system was thoroughly inspected and tested for
proper operation. To minimize shipping damage, careful attention was given to
making your machine ready for shipment.
The dimensions of the machine are listed in Table 1. Throughout this
manual, all references to the left or right side and to the front or back are made
as if you were on the machine, ready to exercise.
Table 1. Dimensions and Specifications for the
StairMaster 7000 PT Exercise System
Physical Dimensions:
Length 50.0 inches (127 cm)
Width 29.0 inches (74 cm)
Height 78.0 inches (198 cm)
Weight 409 pounds (186 kg)
Power Supply Specifications:
Output Voltage 12 to 19 VDC
Output Current Capacity 2.5 amps
Input Power Consumption 55 watts
The machine requires minor assembly before operation. You will need a pair of
diagonal cutters or a pair of heavy-duty scissors. The Stepmill 7000 PT exercise
system must be placed on a solid, level floor near an AC wall outlet. A minimum
ceiling height of 9 feet (2.8 meters) and a doorway width of 29 inches (74 cm) is
required.
1. Roll the machine to its desired location on its temporary wheels.
2. Have an assistant tilt the machine forward until the wheels are off the
floor. Make sure the assistant can support the machine so you can remove
the temporary wheels.