Filter
Top Products
10. Wrap theWeight Cable (52) around a 2" Pulley (4).
Attach the Pulleyto the RightArm (16) with a 3/8" x
1 3/4" Bolt(40) and 3/8" Nylock Nut (6).
Lay theWeight Cable (52) over a 3 1/2' Pulley(5).
Attach a Cable Trap (67) and the Pulleyto the side
of theUpright (9) with a 3/8" x 1 3/4' Bolt(40)
and 3/8' Nylock Nut (6). Make sure that theCable
Trap isin the "12 o'clock" position.
11. Wrap theWeight Cable (52) under a 2" Pulley(4).
Attach the Pulleyto the bracket on the side of the
Moment Arm (74) with a 3/8" x 1 3/4" Bolt(40)
and 3/8" Nylock Nut (6). Make surethat the Weight.
Cable is betweenthe Pulleyand the indicated tab.
Attach the end of theWeight Cable (52) to the right
side ofthe LegDeveloper (23) with a 3/8' x 2 1/4"
Boil (45) and 3/8" Nylock Nut (6). Do not over'llght-
en the Nylock Nut, the Cable must be able Io swiv-
el freely or it will be damaged.
12. Insertthe threaded bolt on the end of the Weight
Cable (52) intothe AdjustmentBracket (53). Finger
tighten the 5/16" Nut (82) onto the threaded bolt
untilthere isslighttensionin the Cable.
13. Wet the upper ends of the left and Right Arms (15,
16) and the insidesof thetwo Large Pads (17) with
soapy water. Slide the LargePadsonto theArms.
Altoch the Backrest(19) to the Upright (9) with two
1/4' x 2 1/2" Bolts (46).
12
13
17
1
6