Filter
Top Products
9
6. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (56) so that the treadmill is more stable;
do not fully fold the Frame yet.
Attach a Wheel (97) with the M10 Nut (19), and
the M10 x 50mm Bolt (31) that you removed in
step 1. Do not overtighten the Nut; the Wheel
must turn freely.
Press a Base Cap (87) into the Base (95).
6
95
97
31
56
19
87
5. Hold a Screw Spacer (90) inside the lower end
of the Right Upright (89). Insert an M10 x 95mm
Screw (8) with an M10 Star Washer (9) into the
Right Upright and the Screw Spacer. Repeat
t
his step with a second Screw Spacer (90),
an M10 x 68mm Screw (114), and an M10 Star
Washer (9).
H
old the Right Upright (89) against the Right
Upright Spacer (91). Be careful not to pinch
the Upright Wire (88). Tighten the M10 x 95mm
Screw (8) and the M10 x 68mm Screw (114)
until the heads of the Screws touch the Right
Upright; do not fully tighten the Screws yet.
91
89
114
88
9
90
8
5