Filter
Top Products
6
ASSEMBLY
A
ssembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of
the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri-
c
ant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys and your own Phillips screwdriver , adjustable
wrench , and scissors .
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preat-
tached. To avoid damaging parts, do not use power tools for assembly. Extra hardware may be included.
Base Foot Spacer
(94)–2
M8 Star
Washer (10)–10
M10 Star
Washer (9)–4
3/8" Locknut
(6)–3
1/4" Star
Washer (73)–2
M4.2 x 13mm
Screw (116)–8
M4.2 x 16mm
Screw (82)–4
M10 x 95mm Screw (8)–2
Screw Spacer (90)–4
M4.2 x 25mm
Tek Screw (3)–4
M8 x 25mm
Bolt (5)–6
M5 x 16mm Screw
(108)–2
5/16" x 5/8"
Screw (113)–4
M10 x 68mm Screw (114)–2
3/8" x 2"
Bolt (37)–2
3/8" x 1 3/4"
Bolt (7)–1