Filter
Top Products
20
HOW TO USE A CALORIE WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 17.
2. Select a calorie workout.
To select a calorie workout, press the Calorie
Workouts button repeatedly until the desired work-
out appears in the display.
When you select a calorie workout, the maximum
incline level of the workout will flash in the lower left
display, the maximum speed setting will flash in the
lower right display, and the approximate number of
calories you will burn will flash in the upper display.
In addition, a profile of the speed settings of the
workout will scroll across the display.
3. Enter your weight if desired.
For the most accurate calorie count, enter your
weight into the console by pressing the Wt. in-
crease and decrease buttons repeatedly. Note:
Once you have entered your weight, your weight
will be saved in memory.
4. Start the workout.
Press the Start button or the Speed increase button
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
first speed and incline settings of the workout. Hold
the handrails and begin walking.
Each workout is divided into one-minute segments.
One speed setting and one incline setting are pro-
grammed for each segment. Note: The same
speed setting and/or incline setting may be pro-
grammed for consecutive segments.
During the workout, the profile will show your
progress. The flashing segment of the profile repre-
sents the current segment of the workout. The
height of the flashing
segment indicates the
speed setting for the cur-
r
ent segment. At the end
of each segment, a se-
r
ies of tones will sound.
If a different speed
and/or incline setting is
programmed for the next segment, the speed
and/or incline setting will flash in the display to alert
you and the treadmill will automatically adjust to the
new speed and/or incline setting.
When the workout ends, the walking belt will slow
to a stop.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the Speed or
Incline buttons; however, when the next segment
of the workout begins, the treadmill will auto-
matically adjust to the speed and incline set-
tings for the next segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton or the Speed increase button. The walking belt
will begin to move at 2 Km/H. When the next seg-
ment of the workout begins, the treadmill will auto-
matically adjust to the speed and incline settings
for the next segment.
5. Follow your progress with the displays.
See step 6 on page 18.
6. Measure your heart rate if desired.
See step 7 on page 19.
7. When you are finished exercising, remove the
key from the console.
See step 8 on page 19.
Current Segment