Filter
Top Products
7
2. With the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the
Frame (56) so that the treadmill is more stable;
do not fully fold the Frame yet.
Cut the shipping tie securing the Upright Wire
(88) to the Base (95). Next, locate a plastic tie in
the indicated hole in the Base, and use the tie to
pull the Upright Wire out of the hole.
Attach two Base Feet (92) to the Base (95) in
the locations shown with two M4.2 x 25mm Tek
Screws (3) and two Base Foot Spacers (94).
Attach the other two Base Feet (92) with only
two M4.2 x 25mm Tek Screws (3).
95
3
92
2
92
3
56
88
3
92
3
92
94
94
1
. Make sure that the power cord is unplugged.
R
emove the M10 Nut (19), the M10 x 50mm Bolt
(31), and the shipping bracket (A) from the Base
(95). Remove the shipping bracket from the
other side of the treadmill. Discard the shipping
b
rackets. Save the Nuts and the Bolts for
steps 3 and 6.
95
19
A
31
Hole
1