Filter
Top Products
• Training view numbering : Select On or Off. If you set the Training view numbering On , the number of the
training view appears for a few seconds when you browse the training views with UP/DOWN.
• Training view: Select 3 rows or 2 rows. The training information will be displayed on three or two rows
according to your selection.
Bike Settings
To view or modify bike settings select MENU > Settings > Sport profiles > Cycling (Bike1)/Cycling2 (Bike 2)
> Bike 1 settings/Bike 2 settings
• Speed sensor: Select Off, On or Search new.
• Wheel size: Set the wheel size to xxxx mm. For more information, on measuring the wheel size, see
Measuring Wheel Size.
• Cadence sensor: Select Off, On or Search new.
• Autostart: Set Off or On. If you select On, Speed sensor for bike required, Activate speed sensor
YES/NO is displayed. Select YES and Autostart on is displayed. If you select NO, Activation canceled is
displayed.
All the new sensors must be paired with the training computer before they can be activated.
For more information on pairing a new sensor to the training computer see Using a New Accessory
(page ? ).
Measuring Wheel Size
Select MENU > Settings > Sport profiles > Cycling (Bike 1)/Cycling 2 (Bike 2) > Bike 1 settings > Wheel
size > Set wheel size
Wheel size settings are a prerequisite for correct cycling information. There are two ways of determining
the wheel size of your bike:
Method 1
Look for the diameter in inches or in ETRTO printed on the wheel. Match it to the wheel size in
millimeters in the right column of the chart.
ETRTO Wheel size diameter (inches) Wheel size setting (mm)
25-559 26 x 1.0 1884
23-571 650 x 23C 1909
35-559 26 x 1.50 1947
37-622 700 x 35C 1958
47-559 26 x 1.95 2022
20-622 700 x 20C 2051
52-559 26 x 2.0 2054
23-622 700 x 23C 2070
25-622 700 x 25C 2080
28-622 700 x 28 2101
32-622 700 x 32C 2126
42-622 700 x 40C 2189
47-622 700 x 47C 2220
ENGLISH
28 Settings