Filter
Top Products
select Miles per hour or Minutes per mile.
• Automatic lap is set off as default. Press START and Set distance is displayed. Set the distance in
kilometers or in miles and confirm with START. Automatic lap set to x.x km is displayed. After this, you
can select to have the Automatic lap Off or On.
• Show in pre-training mode? Select YES, and Sport shown in pre-training mode is displayed. When you
press START in time mode, the sport will be visible in the list of sports in pre-training mode. Select No
and Sport not shown in pre-training mode is displayed.
• Training view numbering : Select On or Off. If you set the Training view numbering On, the number of the
training view appears for a few seconds when you browse the training views with UP/DOWN.
• Training view: Select 3 rows or 2 rows. The training information will be displayed on three or two rows
according to your selection.
Bike Settings
To view or modify bike settings, select MENU > Settings > Sport profiles > Cycling (Bike1)/Cycling2 (Bike 2)
> Bike 1 settings/Bike 2 settings
• Speed sensor: Select Off or Search new. If you have already paired one speed sensor, the option On is
also visible.
• Wheel size: Set the wheel size to xxxx mm. For more information on measuring the wheel size, see
Measuring Wheel Size.
• Cadence sensor: Select Off or Search new. If you have already paired one cadence sensor, the option On
is also visible.
• Autostart: Set Off or On. If you select On, Activate speed sensor YES/NO is displayed. Select YES and
Autostart on is displayed. If you have not paired a speed sensor with your training computer, Speed
sensor for bike required is displayed and the training computer returns to Bike 1 settings/Bike 2
settings. If you select NO, Activation canceled is displayed.
All new sensors must be paired with the training computer before they can be activated.
For more information on pairing a new sensor to the training computer, see New Accessory (page 38).
Measuring Wheel Size
Select MENU > Settings > Sport profiles > Cycling (Bike 1)/Cycling 2 (Bike 2) > Bike 1 settings > Wheel
size > Set wheel size
Wheel size settings are a prerequisite for correct cycling information. There are two ways of determining
the wheel size of your bike:
Method 1
Look for the diameter in inches or in ETRTO printed on the wheel. Match it to the wheel size in
millimeters in the right column of the chart.
ETRTO Wheel size diameter (inches) Wheel size setting (mm)
25-559 26 x 1.0 1884
23-571 650 x 23C 1909
35-559 26 x 1.50 1947
37-622 700 x 35C 1958
47-559 26 x 1.95 2022
20-622 700 x 20C 2051
52-559 26 x 2.0 2054
23-622 700 x 23C 2070
ENGLISH
30 Settings