Filter
Top Products
17
44. Press two 3/4Ó Round Inner Caps (43) into each Pad
Tube (42).
Insert one Pad Tube (42) into the Seat Frame (7).
Slide a Foam Roller (30) onto each end of the Pad
Tube.
Insert the other Pad Tube (42) into the Leg Lever
(41). Slide a Foam Roller (30) onto each end of the
Pad Tube.
44 43
43
30
30
42
42
30
30
43
43
7
41
Miscellaneous Assembly
47. Follow the procedure described in steps 45 and 46 to
attach the Left Shroud (35) on the opposite side of
the weight stack.
Attach both Shrouds (35, 36) to the end of the top bar
on the Weight Upright (2) with a 1/4Ó x 5/8Ó Bolt (80).
Tie the Shrouds (35, 36) together with four 1/4Ó x 5/8Ó
Bolts (80).
Go back and fully tighten all of the 1/4Ó x 5/8Ó Bolts
(80) used to attach both Shrouds (35, 36).
47
35
36
80
80
80
2
Top Bar
80
80
45. Identify the Right Shroud (36) which is the one that
does not have a slot in it.
Attach the Right Shroud (36) to the indicated brackets
on the Weight Base (5) with two 1/4Ó x 5/8Ó Bolts (80).
Do not tighten the Bolts yet.
45
80
36
80
5
Bracket
46. Attach the Right Shroud (36) to the indicated bracket
on the Weight Upright (2) with a 1/4Ó x 5/8Ó Bolt (80).
Do not tighten the Bolt yet.
46
36
80
2
Bracket