Filter
Top Products
40 Forerunner 410 Owner’s Manual
Appendix
Troubleshooting
Problem Solution/Answer
The bezel is not
responding to my taps.
Unlock the bezel: press enter and quit simultaneously
. Press
rmly on the bezel for the best results. Tap the outer ring on the
bezel, not the inner ring near the watch face.
My device never gets
satellite signals.
Touch and hold GPS. Make sure GPS is set to On.
Take your device outside and away from tall buildings. Remain
stationary for several minutes.
The battery gauge
does not seem
accurate.
Allow the device to fully discharge, and then fully charge it
(without interrupting the charge cycle).
The heart rate monitor,
foot pod, or GSC 10
will not pair with the
device.
Stay 10 m away from other ANT+ accessories while pairing.
Bring the device within range (3 m) of the sensor while pairing.
Restart the scan for the accessory (see page 31). Make sure
the accessory is sending data (for example, you need to be
wearing the heart rate monitor). If the problem persists, remove
the battery. Wait 30 seconds, and insert the new battery
The heart rate data is
inaccurate.
See page 32.
Some of my data
is missing from my
device.
The device overwrites the oldest detailed data if you do not
transfer it to your computer. Transfer data regularly to avoid
losing data.