Filter
Top Products
34
Quick Troubleshooting Check List
Table 5
For any further information regarding service isssues,
please contact your Authorized Bodyguard
®
Dealer.
PROBLEM
• Computer will
not light on
when power
is turned ON.
• Crank arms
are loose.
• Upper frame
is loose.
• No resistance
on pedals,
but computer
lights up.
• Computer key(s)
not responding
to touch.
POSSIBLE CAUSE/SOLUTION
• Check THE fuse – replace if necessary.
• Check building electrical power line and fuse box – contact
qualified electrician.
• The computer cable may be disconnected from the computer board
– inspect condition of this cable.
• Check that power cord is functional – replace if necessary.
• Remove the cover, tighten the bolts holding the crank arms (long &
short) with a hexagonal bolt 3/8.
• Remove the cover and tighten the five screws holding the upper
frame to the base frame with the provided Allen key.
• Speed sensor out of alignment – realign or replace if necessary.
• Transformer or power supply board unit defective – replace
necessary parts.
• With power OFF, verify that all wire connections are secure.
• Keys may have been damaged from liquids penetrating behind seal
– replace computer display.
• Excessive amount of cleaning solution used.
• Use mild cleanser on damp cloth only when cleaning computer
console and unit.