Filter
Top Products
31
Heart Rate System Test
The heart rate system test allows you to determine if the optional heart rate system is properly
working and that the computer is displaying your heart rate signal during a program.
1. In the Diagnostics menu, select the “HEART RATE TEST” and accept it by pressing the JustGo™/
ENTER key.
2. The display will show “HEART RATE” and the number “0” beside it. Attach your heart rate
chest strap. Simply stand near the computer. Within a few seconds, your actual heart rate sig-
nal will be displayed on the screen.
3. Press the PAUSE/STOP key to terminate the test.
EPROM Test
The EPROM test allows you to determine if the program stored in the EPROM chip is intact.
1. In the Diagnostics menu, select the “EPROM TEST” and accept it by pressing the JustGo™/
ENTER key.
• If the EPROM is intact, the display will show “EPROM IS OK CHECKSUM XXXX”.
• If the EPROM is damaged, the display will show “EPROM IS NOT OK”.
2. Press the PAUSE/STOP key to terminate the test.
Statistics
The statistics allows you to view different parameters related to the use of your elliptical such as
time and distance.
1. In the Diagnostics menu, select the “STATISTICS” option and accept it by pressing the JustGo™/
ENTER key.
• The TOTAL DISTANCE displayed indicates the total distance traveled with the elliptical during
all exercise programs.
• The EXERCISE TIME displayed indicates the amount of time the elliptical has been used during
all exercise programs.
2. Press the PAUSE/STOP key to terminate the test.