A SERVICE OF

logo

5-40 ENGINE TOP END
Muffler
Muffler Body Installation
If the muffler body cover [A] was removed, install it.
Fit the dampers [B] of the muffler body into the slots [C]
in the muffler cover.
Torque - Muffler Body Cover Bolts [D]: 7.0 N·m (0.70 kgf·m,
62 in·lb)
Replace the muffler body gasket [E] with a new ones.
Install the muffler body.
Pass the muffler stay [F] through the hole [G] of the rear
fender front [H].
Tighten:
Torque - Muffler Body Assembly Nuts [I]: 22 N·m (2.2 kgf·m,
16 ft·lb)
Muffler Body Mounting Bolts [J]: 25 N·m (2.5
kgf·m, 18 ft·lb)
Throughly warm up the engine, wait until the engine cools
down, retighten all the bolts and nuts.
Install the removed parts (see appropriate chapters).
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com
www.zxforums.com