Insert and remove a memory card
NOTE: The HP Color LaserJet CP1518ni recognizes memory cards up to 2 GB.
1. Push the memory card into the appropriate memory slot to seat it.
NOTE: You can use only one memory card in the product at a time. If two or more are inserted,
the product displays an error message.
2. The product reads the card, and then the product control panel displays X photos found on
card, where X is the number of recognized .JPEG files found on the memory card.
After a few seconds, the message Photo menu Easy Photo Print appears on the control-panel
display. Now you can use the HP Color LaserJet CP1518ni to print photos. See
Print photos directly
from the memory card on page 63.
3. Grasp the card and gently pull it straight out of the memory card slot to remove it.
CAUTION: To avoid damaging the files stored on the card, do not remove a memory card while
the product is accessing it. Wait for the LED near the memory card slots to stop blinking before
you remove the memory card. When the LED remains illuminated, it is safe to remove the memory
card.
ENWW Insert a memory card 61
