Network config. menu
Use this menu to establish network configuration settings.
Menu item Sub-menu item Description
TCP IP config Automatic
Manual
Select Automatic to automatically configure all the
TCP/IP settings.
Select Manual to manually configure the IP address,
subnet mask, and default gateway.
The default setting is Automatic.
Automatic crossover On
Off
This item is used when you are connecting the
product directly to a personal computer using an
Ethernet cable (you might have to set this to On or
Off depending on the computer being used).
The default setting is On.
Network services IPv4
IPv6
This item is used by the network administrator to limit
the network services available on this product.
On
Off
The default setting is On.
Memory card On
Off
Use this option to enable or disable file sharing
between an installed memory card and the product.
The default setting is Off.
Show IP address on control
panel
No
Yes
No: The product IP address will not appear on the
control-panel display.
Yes: The product IP address will appear on the
control-panel display.
The default setting is No.
Restore defaults Press OK to restore the network configuration
settings to the default values.
48 Chapter 6 Control panel ENWW
