System setup menu
Use this menu to establish basic product settings. The System setup menu has several sub-menus.
Each is described in the following table.
Menu item Sub-menu item Sub-menu item Description
Language Select the language for the control-panel
display messages and the product
reports.
Paper setup Def. paper size Letter
A4
Legal
Select the size for printing internal
reports or any print job that does not
specify a size.
Def. paper type A list of available media
types appears.
Select the media type for printing internal
reports or any print job that does not
specify a type.
tray 2 Paper size
Paper type
Select the default size and type for tray 2
from the list of available sizes and types.
Paper out action Wait forever
Override
Cancel
Select how the product should react
when a print job requires a size or type
that is not available or when a specified
tray is empty.
Select Wait forever to make the product
wait until you load the correct media and
press OK. This is the default setting.
Select Override to print on a different
size or type after a specified delay.
Select Cancel to automatically cancel
the print job after a specified delay.
If you select either Override or Cancel,
the control panel prompts you to specify
the number of seconds to delay. Press
the Right arrow (
) button to increase
the time, up to 3600 seconds. Press the
Left arrow (
) button to decrease the
time.
Print quality Calibrate color After power on
Calibrate now
Calibration mode
After power on: Select how soon the
product should calibrate after you turn it
on. The default setting is 15 minutes.
Calibrate now: Makes the product
perform a calibration immediately. If a job
is processing, the product calibrates after
the job is complete. If an error message
is displayed, you must clear the error
first.
46 Chapter 6 Control panel ENWW
