Filter
Top Products
9
10. Press a 2” Square Inner Cap (56) into each
end of the Top Frame (2). Press a 2” Square
Inner Cap (56) into each side of the Butterfly
Frame (3). Press two 1” Round Inner Caps
(70) into the top of the Butterfly Frame.
Attach the Butterfly Frame (3) to the Top
Frame (2) with two 5/16” x 2 3/4” Bolts (55),
two 5/16” Washers (20) and two 5/16” Nylon
Locknuts (40).
11. Attach the Top Frame (2) to the Ab Upright (1)
with two 5/16” x 2 3/4” Bolts (55), two 5/16”
Washers (20) and two 5/16” Nylon Locknuts
(40). Do not tighten the Nylon Locknuts
yet.
Attach the Butterfly Frame (3) to the Leg
Press Upright (4) with two 5/16” x 3” Bolts
(92), the Support Plate (98) and two 5/16”
Nylon Locknuts (40). Do not tighten the
Nylon Locknuts yet.
12. Attach the upper ends of one set of Weight
Guides (23) to the Top Frame (2) with a 5/16”
x 6” Bolt (67), two 1/2” x 3/4” Spacers (69)
and a 5/16” Nylon Locknut (40).
Attach the upper ends of the other set of
Weight Guides (23) in the same manner.
Before continuing, firmly tighten all nylon
locknuts used in steps 2 through 12.
FRAME ASSEMBLY
2
3
55
40
20
20
56
56
56
56
55
70
10
55
92
20
98
40
40
4
3
2
1
11
23
23
69
40
67
67
40
2
69
12