Filter
Top Products
12
20. Press a 1 3/4” Square Inner Cap (48) into the
lower end of the Left Arm (6). Wet the lower
end of the Left Arm with soapy water. Slide a
10” Pad (22) onto the Left Arm.
Repeat this step with the Right Arm (5).
21. Press a 1 3/4” Square Inner Cap (48) into the
top of the Leg Lever Frame (30).
Slide the Leg Lever Frame (30) into the Rear
Seat Frame (16). Align one of the holes in the
Leg Lever Frame with the upper hole in the
Rear Seat Frame. Insert the Large Lock Pin
(96) into the Rear Seat Frame.
Tighten the 1/4” x 5/8” Screw (99) into the
lower hole in the Rear Seat Frame (16).
22. Press a 1 3/4” Square Inner Cap (48) into
each end of the Leg Lever (15). Attach the
Small Bumper (95) to the Leg Lever with a 1”
Tap Screw (72).
Lubricate a 3/8” x 2 1/2” Bolt (65). Attach the
Leg Lever (15) to the Leg Lever Frame (30)
with the Bolt and a 3/8” Nylon Jam Nut (43).
22
20
21
ARM ASSEMBLY
5
6
48
22
48
48
48
15
95
72
43
30
65
99
30
96
16
22