Filter
Top Products
2. Press a Row Tube Endcap (51) into each side
of the Pulley Base (79). Press a 2” Square
Inner Cap (56) into the end of the Pulley
Base.
Attach the Pulley Base (79) to the Weight
Base (14) with two 5/16” x 2 3/4” Bolts (55),
two 5/16” Washers (20) and two 5/16” Nylon
Locknuts (40). Do not fully tighten the
Nylon Locknuts.
3. Slide the Ab Upright (1) onto the indicated
5/16” x 2 1/2” Carriage Bolts (49) in the
Weight Base (14). Partially tighten a 5/16”
Nylon Locknut (40) onto each Carriage Bolt.
Do not fully tighten the Nylon Locknuts.
Slide the Leg Press Upright (4) onto the indi-
cated 5/16” x 2 1/2” Carriage Bolts (49) in the
Press Base (13). Partially tighten a 5/16”
Nylon Locknut (40) onto each Carriage Bolt.
Do not fully tighten the Nylon Locknuts.
4. Slide the Rear Seat Frame (16) onto the indi-
cated 5/16” x 2 1/2” Carriage Bolts (49) in the
Weight Base (14). Partially tighten a 5/16”
Nylon Locknut (40) onto each Carriage Bolt.
Do not fully tighten the Nylon Locknuts.
Attach the other end of the Rear Seat Frame
(16) to the Ab Upright (1) with two 5/16” x
2.3/4” Bolts (55), two 5/16” Washers (20) and
two 5/16” Nylon Locknuts (40). Do not fully
tighten the Nylon Locknuts.
4
2
FRAME ASSEMBLY
6
1
4
40
40
49
49
40
1
40
20
55
49
13
14
14
14
51
55
20
51
40
40
56
79
16
3