Filter
Top Products
GB
3
OWNER'S MANUAL • T50
partner. Whatever your goal in training, we are
certain this is the training equipment to get you
there. You'll fi nd information about using your
exercise equipment and what makes for effi cient
training at Tunturi's website at www.tunturi.com.
ASSEMBLY
Before assembling the device, insure all parts are
present:
1. Frame
2. Handlebars (2)
3. Horizontal handlebar
4. Meter
5. Power cord
6. Assembly kit (contents are marked with an * in
the spare part list): keep the assembly tools, as you
may need them e.g. for adjusting the equipment
In case of problems contact your Tunturi dealer.
The directions left, right, front and back are
defi ned as seen from the exercising position. To
avoid injury, you must fold up the deck prior to
lifting the treadmill out of the box.
HANDRAILS
Connect the wires before you assemble the
handrails. Secure each handrail with four washers
and bolts.
NOTE: Do not tighten these bolts until
the horizontal handlebar and monitor have been
secured.
HORIZONTAL HANDLEBAR
The horizontal handlebar (rod) is tapered on one
side. Insert the tapered end of the rod into the
right handrail before fi tting the rod into the left
side.
NOTE: the left side is secured with the long
bolt while the right ride is secured with the short
bolt. Do not tighten these bolts until the monitor
has been secured.
MONITOR
Connect the wire. After connecting the wire thread
it into the handlebar
then push the monitor onto
the handrails. You may have to shake the handrails
from side to side to get the monitor to fi t. Once
you have the monitor in place, secure and tighten
the bolts on the monitor. Tighten all bolts.
Remove the protective fi lm from the display.
POWER CORD AND GROUNDING
INSTRUCTIONS
Plug the socket end of the power cord into the
treadmill at the left front corner. Before connecting
the device to a power source, make sure that
local voltage matches that indicated on the type
plate. The treadmill operates at 230 V or 120 V.
Turn on the power using the switch next to the
socket on the treadmill. This treadmill must be
grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for
electrical current to reduce the risk of electrical
shock. This product is equipped with a cord
having an equipment-grounded conductor and a
grounding plug. The plug must be plugged into
an appropriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances. Do not use extension cables when
connecting the equipment to the power source.
DANGER! Improper connection of the
equipment-grounding conductor can result in
a risk of electric shock. Check with a qualifi ed
electrician or serviceman, if you are in doubt as to
T50_manual.indd 3T50_manual.indd 3 3.8.2005 11:24:083.8.2005 11:24:08