Filter
Top Products
16
START/SPLIT to view the currently selected performance data screen. Release START/SPLIT to return to Navi-
gate Mode.
NOTE: You cannot use Peek to Performance while there is a popup message on the display.
Location
Find your current position anywhere on the globe with the Location feature.
1. Press the MODE button until NAVIGATE displays.
2. Press qto highlight LOCATION, then press 8 .
Your current latitude and longitude (in degrees, minutes, and seconds) and altitude (in feet or in meters, based
on configure) display. The location will update every 2 seconds for as long as the GPS is fixed on a satellite.
NOTE: If the GPS cannot fix on a satellite, this message displays:
Waypoints
Waypoints are GPS markers you can save to the Global Trainer™ Bodylink® System Watch memory. You can
track back to them later, or you can string them together to build routes to follow for your workout.
To Open the Waypoints Menu
1. Press the MODE button until NAVIGATE displays.
2. Press q to highlight WAYPOINTS, then press 8 .
To Save a Waypoint
Any location can be saved as a waypoint to the Global Trainer™ Bodylink® System Watch memory. You can
save up to 100 waypoints.
1. Open the Waypoints menu.
2. Press q to highlight SAVE, then press 8 . Your current position displays.
3. Press p or q to select YES, then press 8 to save the waypoint and return to the Waypoint List. Select NO,
then press 8 to return to the Waypoint List without saving.
NOTE: You can edit the latitude and longitude. Press p to move to the latitude field. Press 8 to edit the de-
grees, minutes, seconds or fractional seconds. Press q to select Save, then press 8 to save your changes.
To View the Waypoint List
1. Open the Waypoints menu.
2. Press q to highlight LIST ALL, then press 8 . The Waypoint List displays.
3. Press q to highlight a waypoint, then press 8 to view the waypoint details.
To Rename a Waypoint
1. Open the Waypoint List.
2. Press q to highlight a waypoint, then press 8 to view the waypoint details.
3. Press q to highlight RENAME, then press 8 .
4. Press 8 to open the character list. Press q to highlight the desired character, then press 8 to confirm
your selection. Continue selecting characters to spell the desired waypoint name. The waypoint name can
contain up to six characters. Press 8 when the desired name is entered.