Filter
Top Products
50
NOTE! While in the Data Transfer mode, the
connector/water contacts are used only for the
data transfer. The Dive Mode IS NOT automati-
cally activated if the contacts are submerged.
After you have fi nished the data transfer, press
the SMART (Quit) to exit Data Transfer mode.
If a button is not pressed or no data is trans-
ferred within 5 minutes, the instrument beeps
and returns to the timekeeping display auto-
matically.
4.2. SIMULATION MODE
[2 SIMUL]
The Simulation mode can be used to acquaint
yourself with the features and displays of the
instrument before diving, to plan dives in ad-
vance, for demonstration or education purpos-
es, or just for pleasure.
The dive computer has two simulation modes
(Fig. 4.16.):
• The DIVE SIMULATOR (Fig. 4.17.)
• The DIVE PLANNING SIMULATOR
(Fig. 4.19.).
In Simulation Mode, time moves four times
faster than real time (when diving), i.e., 15s
= 1min.
4.2.1. Dive Simulator
[1 SIMDIVE]
The Dive Simulator mode is an excellent tool
for becoming familiar with the dive computer
and planning your dives. Suunto recommends
using the dive simulator to run through different
dive scenarios. The Dive Simulator will allow
you to “perform” dive profi les of your choice
and see what the display would look like during
an actual dive. This includes basic dive infor-
mation, as well as audible and visual warn-
ings. Cylinder pressure drop is simulated with
a constant, depth dependent consumption. If
Fig. 4.19. Dive Planning
Simulator mode.
[2 SIMPLAN].
SELECT
Fig. 4.17. Dive Simulator
mode. [1 SIMDIVE].
Fig. 4.18. Selected
Dive Simulator mode.
Descend by pressing
the arrow down (TIME)
button and ascend by
pressing the arrow up
(PLAN) button.
SELECT
TIME
DIVE
m
QUIT
bar