Suunto VYTEC DS Watch User Manual


 
2
PrEN 13319
PrEN 13319 ”Diving accessories – Depth gauges and combined depth
and time measuring devices – Functional and safety requirements, test
methods” is a European diving depth gauge standard draft. The VYTEC
is designed to comply with this draft standard.
ISO 9001
SUUNTO Oy’s Quality Assurance System is certi ed by Det Norske
Veritas to be according to the ISO 9001 in all SUUNTO Oy’s operations
(Quality Certi cate No. 96-HEL-AQ-220).
SUUNTO Oy does not assume any responsibility for losses or claims by
third parties, which may arise through the use of this device.
Due to continuous product development, the VYTEC is subject to change
without notice.
WARNING!
READ THIS MANUAL! Carefully read this instruction manual in its
entirety paying close attention to all warnings listed below, including
section 1.1. ”Safety Precautions”. Make sure that you fully understand
the use, displays and limitations of the dive computer because any
confusion resulting from neglecting to follow this instruction manual or
from improper use of this device may cause a diver to commit errors
that may lead to serious injury or death.
WARNING!
NOT FOR PROFESSIONAL USE! Suunto dive computers are intend-
ed for recreational use only. The demands of commercial or profes-
sional diving may expose the diver to depths and exposures that tend
to increase the risk of decompression illness (DCI). Therefore, Suunto
strongly recommends that the device be not used for commercial or
professional diving activity.
WARNING!
ONLY DIVERS TRAINED IN THE PROPER USE OF SCUBA DIVING
EQUIPMENT SHOULD USE A DIVE COMPUTER! No dive computer
can replace the need for proper dive training. Insuf cient or improper
training may cause diver to commit errors that may lead to serious
injury or death.