Filter
Top Products
43
4. MENU BASED MODES
To make yourself familiar with the menu based
functions, please use your Quick Re ference
Guide supplied with the Vytec to gether with
the information in this chapter.
The main menu based functions are grouped
under 1) memory, 2) dive simulation and 3)
setting modes.
THE USE OF THE MENU BASED
FUNCTIONS
1. Activate the menu based modes by press-
ing once the SMART (MODE) button in the
Dive Mode (Fig. 4.1.).
2. Scroll the mode options by pressing the
arrow up/down buttons. When scrolling
the options, the label and an equivalent
number are shown on the display (Fig. 4.2.
– 4.4.).
3. Press the SMART (Select) button once to
select the desired option.
4. Scroll the submode options by pressing
the arrow up/down buttons. When scroll-
ing the options, the label and an equivalent
number are shown on the display.
5. Select the desired option by pressing once
the SMART (Select) button. Repeat the
procedure, if there are more submodes.
6. Depending on the mode, you are now able
to have a look at the memories, simulate
a dive, or make desired settings (use the
the arrow up/down buttons). The SMART
button is used to Quit or to confi rm the set-
tings (OK).
If you do not press any of the buttons for 5
minutes while in a Menu based mode, the in-
strument beeps and returns to the timekeeping
display. In the Simulation Mode, however, the
equivalent time is 60 minutes.
OPTIONS
QUIT
SELECTSELECTSELECT
SELECT
SELECT
Fig. 4.1. Main menu based
Mode options. [3 MODE].
Fig. 4.2. Memory option.
[1 MEMORY].
Fig. 4.3. Simulation op-
tion. [2 SIMUL].
Fig. 4.4. Set option.
[3 SET].