Filter
Top Products
67. Slide the Pad Tube (31) through the Right Seat
Frame (9). Slide two Small Foam Pads (32) onto
the Pad Tube. Press two Foam Caps (58) intothe
Pad Tubes.
Slide two Leg Lever Foam Pads (33) onto the
Leg Lever (11).
68. Attach the Knee Pad (30) to the Dip Assist (21)
with four M6 x 16mm Screws (85).
67
58
68
32
31
3O
85
33
85
58
69. Make sure that all parts have been properlytightened.The use ofthe remainingparts will be explained in
ADJUSTMENTS, beginningon the following page.
Before usingthe weight system, pull each cable a few times to make sure that the cables move smoothly
over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If
the cables are not properly installed, they may be damaged when heavy weight is used. See the
CABLE DIAGRAMS on pages 26 and 27 of this manual for proper cable routing. If there is any slack
in the cables, you will need to remove the slack by tightening the cables. See MAINTENANCE on
page 29.
23