Filter
Top Products
Frame Assembly 1
1.
2.
3.
4.
Before beginning assembly, make sure you
understand the information in the box on
page 5. Refer to the PART IDENTIFICATION
CHART in the center of this manual for help
identifying small parts.
Insert four M8 x 75mm Carriage Bolts(84) up
through the Right Base (1). Note: It may be
helpful to place a piece of tape over the bolt
heads to hold them in place.
Insertfour M8 x 75mm Carriage Bolts (84) up
through the Left Base (2). Note: It may be help-
ful to place a piece of tape over the bolt heads
to hold them in place.
Inserttwo M8 x 75mm Carriage Bolts (84) up
throughthe Rear Base (3). Note: It may be help
ful to place a piece of tape over the bolt heads
to hold them in place.
Attachthe Rear Base (3) and the Left Base (2) to
the Right Base (1) with two M8 x 83mm Bolts (89)
and two M8 Nylon Locknuts(115). Do not tight-
en the Locknuta yet.
2
3
4
84
84
2
84
84
84
3 89
115
115
2
6