Filter
Top Products
Arm Assembly t6
16. Grease an M10 x 108mm Bolt (99). Orientthe
Press Frame (13) as shown.Attach the Press
Frame to the Left Base (2) with the Boltand an
M10 Nylon Locknut (114). Do not overtighten
the Loeknut; the Press Frame must be able to
pivot easily.
17. Remove the M10 x 45mm Button Bolt (105) from
a Press Arm (14).
Attach a Press Handle (16) toa PressArm (14)
with an M10 x 65mm Bolt(96), two M10 Washers
(116), two M10 x 12mm Spacers (75), and an
M10 Nylon Locknut(114).
Attach a Press Arm Cap (56) to the PressArm
(14) with an M10 x 45mm ButtonBolt(105) and
an M10 Large Washer (134).
Attach the PressArm (14) to the Press Frame
(13) with two M8 x 70ram Bolts (97) and two M8
Nylon Locknuts(115).
Repeat this step with the other Press Arm
(14).
18. Grease an M10 x 108ram Bolt(99). Attachthe
Leg Press Frame (12) to the Left Base (2) with
the Boltand an M10 Nylon Locknut(114). Do not
overtighten the Locknut; the Leg Press Frame
must be able to pivot easily.
Grease an M10 x 77ram Bolt (133). Attachthe
Foot Plate (23) to the Leg Press Frame (12) with
the Boltand an M10 NylonLocknut(114). Make
sure the decal on the Foot Plate is right side
up. Do not overtighten the Locknut; the Foot
Plate must be able to pivot easily,
17
18
99
J
2
97
Grease
3_o 114
13 _/
114
9 "/
116
23
11