Filter
Top Products
56. Wrap the Press Cable (69) around a 90mm
Pulley (39). Attach the Pulley,two Half Finger
Guards (42), a Small Cable Trap (48), and an
M10 Washer (116) to the Left Upright(5) with an
M10 x 108mm Bolt(99), an M10 Washer (116),
and an M10 Nylon Locknut(114). Make sure the
Cable Trap and Finger Guards ere oriented as
shown.
57. Wrap the Press Cable (69) around a 90mm
Pulley (39). Attach the Pulley, two Half Finger
Guards (42), a Small Cable Trap (48), and an
M1OWasher (116) to the Press Frame (13) with
an M10 x 135mm Bolt(98). Make sure the Cable
Trap and Finger Guards are oriented as
shown.
58. Wrap the Press Cable (69) around a "V"-pulley
(40). Attach the "V"-pulley, two Half Finger Guards
(42), a Cable Trap (49), and an M10 Washer
(116) to the Left Upright (5) with an M10 x 68mm
Bolt(93) and an M10 Nylon Locknut (114). Make
sure the Cable Trap and Finger Guards are
oriented as shown.
59. Wrap the Press Cable (69) around a 90mm
Pulley (39). Attach the Pulley,two Half Finger
Guards (42), a Small Cable Trap (48), and an
M10 Washer (116) to the Press Frame (13) with
the M10 x 135mm Bolt(98) used in step 57 and
an M10 Nylon Locknut(114). Make sure the
Cable Trap end Finger Guards are oriented as
shown.
60. Wrap the Press Cable (69) under a 90mm Pulley
(39). Attach the Pulley,two M10 Washers (116),
and two Half Finger Guards (42) to the Left Base
(2) with an M10 x 52mm Bolt(102) and an M10
Nylon Locknut(114). Make sure the Finger
Guards are oriented as shown.
56
57
69
42
98 116
42 114
39 .e/
30 116421
2O