Filter
Top Products
ASSEMBLY
Make sure you have the following tools:
Make Assembly Easier for Yourself
Everything in this manual isdesignedto
ensure that the weight system can be assem-
bled successfully by anyone. Before begin-
ning assembly, make sure to read the
information on this page. This brief intro-
duction will save you much more time than
it takes to read it.
Assembly Requires Two Persons
For your convenienceand safety,assemble the
weight system withthe help of another person,
Set Aside Enough Time
Due to the many features ofthe weightsystem,the
assembly processwillrequire several hours.By
setting aside plenty of time and by deciding to
make the task enjoyable, assembly will go smoothly.
You may want to assemble the weight system over
a couple of evenings.
Select a Location for the Weight System
Because of itsweightand size, the weightsystem
shouldbe assembled in the locationwhere itwillbe
used. Make sure that there is enoughroomto walk
aroundthe weightsystem as you assemble it.
How to Unpack the Box
To make assembly as easy as possible, we have
divided the assembly processintofourstages. The
parts needed for each stage are found in individual
bags. Important: Wait until you begin each stage
to open the parts bag for that stage. Place all
parts of the weight system in a cleared area and
remove the packing materials. Do not dispose of
the packingmaterialsuntilassemblyis completed.
• Two adjustable wrenches
• One standardscrewdriver
• One phillipsscrewdriver
• One rubbermallet
• You willalso need grease orpetroleumjelly,a
small amount of soapy water, and clear tape or
maskingtape.
Note: Assemblywillbe more convenientifyou have
a socketset, a setof open-end or closed-end
wrenches, or a set of ratchet wrenches.
How to Identify Parts
To helpyou identifythe small parts used in assembly,
we have included a PART IDENTIFICATION CHART
in the center of this manual. Place the chart on the
floor and use it to easily identify parts during each
assembly step. Note: Some small parts may have
been pre-attached. If a part is not in the parts
bag, check to see if it has been pre-attached.
How to Orient Parts
As you assemble the weight system,make sure all
parts are orientedexactly as shownin the drawings.
Tightening Parts
_ghten all parts as you assemble them, unless
instructedto do otherwise.
Questions?
If you have questions after reading the assembly
instructions,please call our Customer Service
Department at 1-800-4-MY-HOME"
(1-800-469-4663).
The Four Stages of the Assembly Process
Frame Assembly--You will begin by assembling
the base and the uprights that form the skeleton of
the weightsystem.
Arm Assembly--During this stage you will
assemble the arms and the leg lever.
Cable Assembly--During this stage you will
attach the cables and pulleys that connectthe
arms to the weights.
Seat Assembly--During the final stage you will
assemble the seats and the backrests.
5