Filter
Top Products
49
Step 1 .Hold the battery and turn the key of the battery lock
anti-clockwise to open.
Step 2. Move the battery 45º sideways. Eject the grip and lift
the battery out of the holder.
Step 3. Place the battery in a stable position, in such a way
that the energy indicator is visible.
Step 4. Remove the cap from the battery’s charging socket,
which is located at the bottom of the battery.
Step 5. Put the charger plug into the battery’s charging socket
with the arrow mark UP.
Step 6. Connect the power source plug into an electric point
(AC 220~230 volts) and make sure that all poles are
fully inserted into the socket.
Keep the area where the battery is charged well
ventilated and free from litter or anything else
combustible to avoid fire from sparks or overheating.
Step 7. DO NOT PUSH THE “REFRESH” BUTTON ON THE
CHARGER.
For “REFRESH-charging” see section 5.1.3 (below).
The lamp located on the charger will illuminate RED,
indicating that electricity is flowing into the battery.
• First, the lamp blinks RED for a few seconds, then it
gives steady RED light when charging and
• blinks slowly after appr
ox. 4~5 hours (in case of full
charge), indicating that the battery has reached full
capacity and charging has completed.
arrow mark