Cateye EC-T220 Treadmill User Manual


 
39
O
N
1
2
3
4
D
I
P
O
N
1
2
3
4
D
I
P
O
N
1
2
3
4
D
IP
O
N
1
2
3
4
D
IP
Checking the total distances
The total distances which can be used as a guide for when to
change the running belt can be checked.
Press and hold the SPEED + button and the INCLINE + but-
ton together for 3 seconds to change to the total distance check
display. The distance display will show the total distance trav-
eled up until that time.
After checking the total distance, press the EMERGENCY
STOP button to return to the initial screen.
OTHER USEFUL FUNCTIONS
2
Dip switch 1
Switching between mph display and km/h display
As mentioned on page 10 of the "Start Guide," the display can
be switched between mph and km/h by the dip switches inside
the control unit.
When the no. 4 switch of dip switch 1 (SW1) is OFF, the display
units are mph. When the no. 4 switch is turned ON, the display
units are changed to km/h.
Switches no. 1, no. 2, and no. 3 are not used.
After changing the dip switch settings, turn the power off and
back on again for the change in settings to take effect.
Dip switch 1 (SW1)
No. 4: ON km/h
No. 4: OFF mph
Changing the language
As mentioned on page 10 of the "Start Guide," the language
can be changed from English to French, Spanish, or Japanese
(or German) by the dip switches inside the control unit.
For English specifications, the no. 1 and no. 2 switch of dip
switch 2 (SW2) is ON, and all the others are OFF.
Switches no. 3 and no. 4 are not used.
After changing the dip switch settings, turn the power off and
back on again for the change in settings to take effect.
Dip switch 2 (SW2)
No.1: ON No. 2: ON................English
No.1: ON No. 2: OFF ..............French
No.1: OFF No. 2: ON................Japanese
[German: 220V]
No.1: OFF No. 2: OFF ..............Spanish
Setting the Safety Key Function
As mentioned on page 10 of the "Start Guide," open the con-
trol unit and change the settings.
When the no. 1 switch of dip switch 1 (SW1) is ON, the safety
function is activated. When the no. 1 switch is turned OFF, the
function is canceled.
Switches no. 2, no. 3, and no. 4 are not used.
After changing the dip switch settings, turn the power off and
back on again for the change in settings to take effect.
Dip switch 1 (SW1)
No. 1: ON Safety key function activated
No. 1: OFF Safety key function canceled
ON
1
2
3
4
D
IP
O
N
1
2
3
4
D
I
P
Dip switch 1
Dip switch 2