Filter
Top Products
9
Assembly is now complete.
IMPORTANT:
Please read pages 10-12 before beginning
your workout for important instructions
on how to use your elliptical trainer.
STEP 8 – Water Bottle and Holder
Installation
a) Remove (2) Phillips Screws from Vertical Column,
see Figure 8.
b) Align Water Bottle Holder on Vertical Column
and re-install (2) Phillips Screws and tighten.
Figure 8 - Install Water Bottle and Holder
STEP 9 – Charging the Batteries
To maintain power to the Computer for 2 minutes
and retain your data for 1 minute after exercise
has stopped, the Rechargeable Batteries must be
charged before initial use for 2 hours.
a) Install (4) “AA” Rechargeable Batteries
(included) as instructed in Step 4.
b) Plug the battery charger into receptacle
located on the back of the Computer,
see Figure 9.
c) Insert the plug of the battery charger into a
wall outlet and do not use the unit for 2 hours.
d) When charging is complete, remove Battery
Charger and store in a cool dry place.
Figure 9 - Charging the Batteries
water bottle
M4 x 16mm
phillips screw
water bottle
holder
vertical column
receptacle
battery
charger
computer
rechargeable
batteries