Filter
Top Products
Adjustments
42
Congratulations! You are done. After assembly, you should check all functions to ensure correct
operation. If you experience problems, first recheck the assembly instructions to locate any possible
errors made during assembly. If you are unable to correct the problem, call the dealer from whom you
purchased the machine or call 1-800-833-1227 for the dealer nearest you.
Note: If any bolts seem to loosen periodically, use Loctite 242 for a long-term cure.
This gym is capable of a variety of different exercises, as well as, smooth and user-friendly adjustment
features. The following pages of adjustments will help you to familiarize yourself with your new gym. We
hope you are completely satisfied with this product and wish you many years of enjoyment.
1. SEATED PRESS ARMS ADJUSTMENT
A. Grasp the Right Press Arm (M) with one hand.
B. Pull the Flat Head Pop Pin (94) with your other hand to release the Press Arm Holder (K).
C. Adjust the Press Arm Holder (K) to the desired position (depending on the exercise
you are performing).
D. Release the Flat Head Pop Pin, and make sure it is fully
engaged into the
selector hole.
2. BACK PAD (BB) ADJUSTMENT
A. Grasp Back Pad (BB).
B. Turn the T-Shaped Pop Pin (63) in Back Pad Holder (BA) counter clockwise to unlock it,
and then pull the Pop Pin to release the Back Pad Adjuster (BD). Adjust the Back
Pad to the desired position.
C. Release the T-Shaped Pop Pin (63) and make sure it is fully
engaged into the selector
hole in the Back Pad Adjuster (BD). Turn T-Shaped Pop Pin clockwise to lock it in place.
D. For certain exercises you may wish to change the angle of the Back Pad.
Pull the T-Shaped Pop Pin (65) on the Back Pad Adjuster (BD), this will allow you
to change to the desired angle.
E. Release the T-Shaped Pop Pin (65) and make sure it is fully
engaged into the selector hole.