Filter
Top Products
4
Be careful to assemble all components
in the sequence they are presented.
mm
Inch
16
STEP
A. Attach two Convex End Caps (2) to the top of Seated Press Arm Support (H).
Attach Seated Press Arm Support (H) to Top Frame (E) using Shaft (33), and tighten
Allen Screws (34).
B. Attach Bi Angular Bars (J) to Top Frame (E) using:
Two 53 (3/8” x 3” hex head bolt)
Four 74 (3/8” washer)
T
wo 71 (3/8” nylon lock nut)
Also using:
Two 80 (3/8” x 1/2” hex head bolt)
T
wo 79 (3/8” washer)
C. Attach Press Arm Holder (K) to Seated Press Arm Support (H) using Shaft (35), and tighten
Allen Scr
ews (34).
D. Attach Left Press Ar
m (L) to Press Arm Holder (K) using Shaft (KA), and:
One 37 (1/2” x 3/4” hex head bolt)
One 73 (1/2” washer)
And tighten Allen Screws (34).
E.
Attach Right Press Arm (M) to Pr
ess Arm Holder (K) using Shaft (KB), and:
One 37 (1/2” x 3/4” hex head bolt)
One 73 (1/2” washer)
And tighten Allen Screws (34).
F
. Connect Bi Angular Bars (J) to Left Press Ar
m (L) using Shaft (39) and:
Two 74 (3/8” washer)
T
wo 36 (3/8” x 5/8” round allen bolt)
G. Connect Bi Angular Bars (J) to Right Pr
ess Arm (M) using Shaft (39) and:
Two 74 (3/8” washer)
T
wo 36 (3/8” x 5/8” round allen bolt)
Note:
You should now w
r
ench tighten all bolts and nuts in this step.