Filter
Top Products
Page 31
CONSOLE CODES
There are three groups of console codes which are differentiated according to
function. The first group of codes are customization codes and are used to set
defaults such as units, language, heart rate input type, etc. The second group
of codes are machine status codes and are used to track hours and other gen-
eral usage patterns for maintenance purposes. The third group of codes are
diagnostic codes and are used for troubleshooting. The following key actions
are valid in each group of console codes:
• Pressing [LEVEL ∧], [ 1
st
# ], [ENTER] displays what group of codes is
being accessed.
• Pressing [SELECT] or [LEVEL ∧] at that point allows you to view all
possible selections. Once in this mode pressing [LEVEL ∨] backs up
through the selections; pressing [ENTER] then selects that item. If
another test level is available at this point, the [SELECT] / [ENTER]
process is repeated.
• Pressing [∧] [1
st
#, or 2
nd
#], [ENTER ] selects that item directly.
• Pressing [CLEAR] exits any of the special access modes.
Custom Codes
[ ^ ] [ 3 ] [ 0 ] change workout time limit between 5 to 99 minutes
[ ^ ] [ 3] [ 1 ] change units (MPH or KMH)
[ ^ ] [ 3 ] [ 2 ] choose type of heart rate input and priority (telemetry
or contact)
[ ^ ] [ 3 ] [ 3 ] - N/A -
[ ^ ] [ 3 ] [ 4 ] choose console language
[ ^ ] [ 3 ] [ 5 ] change contrast on console
[ ^ ] [ 3 ] [ 6 ] - N/A -
[ ^ ] [ 3 ] [ 7 ] - N/A -
[ ^ ] [ 3 ] [ 8 ]
-
N/A
-
[ ^ ] [ 3 ] [ 9 ] reset to factory defaults
1. Change the workout time by pressing [LEVEL: ^], [3 , [0]. The console will
display “MAX TIME.” Press [ENTER]. The console will then display the
current time limit. Use the keypad to enter the desired time, then press
[ENTER]. For no time limit, press [0].
FREECLIMBER 4600/4400 PT/CL CONSOLE