Filter
Top Products
10. Wrap theWeight Cable (52) around a 2" Pulley (4).
Attach the Pu]Yeyto the Right Arm (16) with a 3/8" x
1 3/4" BOlt(40) and 3/8" N/lock Nut (6).
Lay the Weight Cable (52) over a 3 1/2" Pulley (5).
Attach a Cable Trap (67) and the Pulley to the side
of the Upright (9) with a 3/8" x 1 3/4" Bolt (40)
and 3/8" N/lock Nut (6}. ' _ake sure that the Cobb
Trap is in the "12 o'clock" position.
1I. Wrap the Weight Cable (52) under a 2 3/4' Pulley
(13). Attach the Pulley to the bracket on the side of
the Moment Arm (74) with a 3/8" x 1 3/4" Bolt
(40) and 3/8" Nylock Nut (6).
Attach the end oFthe Weight Cable (52) to the right
side oFthe Leg Developer (23) with a 3/8" x 2" Bolt
(45) and 3/8" Nylock Nut (6). Do not overfighten
the Nylock Nut, the Cable must be able to swivel
freely or it will be damaged.
12. Insertthe threaded bolt on the end oFthe Weight
Cable (52) into the Adjustment Bracket (53). Thread
the 5/16" Nut (82) exactly two complete turns onto
the threaded boil
13. Wet the upper ends of the Left and Right Arms (15,
16) and the insides of the two Large Pads (17) with
soapy water. Slide the Large Pods onto the Arms.
Attach theBackrest(19) to theUpright (9) w_ two
1/4" x 2 1/2" Bolts(46).
10
4O
11
12
6