Filter
Top Products
.
._ilc_ethe Brace (29) onto the threaded boff protrud-
ing from the Tower Frame (10). Thread a 3/8"
Nylock Nut (6) onto the threaded bolt. Do not tight-
en the Nytock Nut yet.
Placeyour Footon lhe extensionand slighl_yraise
the front of theTower Frame (10). Align the lower
• end oFthe Brace (29) with the indicated 3/8" x
2 1/2" Carriage Bolt (1). Lowerthe Tower Frame so
the Brace slidesonto the Corrlage Bolt.Thread a
3/8" Nut (2) with a 3/8" Lack'washer(3) onto the
Carriage Bolt. Do not t_ghtenthe Nut yet.
5. With the help of a secondperson, lift the Upright (9)
and lower it onto the two indicaled 3/8" x 2 1/2"
Carriage Bolts(1) in the Rear Bose (8). Thread a
3/8" Nut (2} and 3/8" Lockwasher(3) ontoeach
Carriage Bolt. Do not tighten the Nuts yet.
Attach the Front Bose (7) to the Upright (91with two
3/8" x 3/4" Bolts (31).
Tighten the 3/8" Nylock Nut (6) attached in assem-
bly step4, and the seven 3/8" Nuts (2) attached _n
assembly steps3 through 5.
,
Attach theFoot Plate (102) to the Upright (9) with
two 3/8" x 3/4" Bolts (31) and 3/8" Nylock Nuts
(6).
With the help of"a second person, lib the Front Base
(7).Peelthe backing off three Rubber Pads(48).
Presstwo onto the underside oFthe Front Basein the
indicatedlocations, and one onto the underside oF
the Upright (9). Lower the Front Base.
Presstwo Rubber Pods (4B) onto the Rear Base(8)
in ,'hesame manner.
4
29 6\
2
-9
"\
;\
\.
4