Filter
Top Products
27
b. Error code ÒERROR 2Ó may appear on the TV if the SPEED increase button or
the PROGRAM START button is pressed and no movement of the walking belt
is detected within seven seconds. Remove the key from the console, wait for ten
seconds, and then reinsert the key. Make sure that you stand on the foot rails of
the treadmill each time you start the walking belt. If the error code appears
again, please call our toll-free HELPLINE. Do not operate the treadmill until the
problem is corrected.
c. Error code ÒERROR 3Ó may appear on the TV if the speed of the walking belt
surges above the selected speed setting. Remove the key from the console, wait
for ten seconds, and then reinsert the key. If the error code appears again,
please call our toll-free HELPLINE. Do not operate the treadmill until the problem
is corrected.
d. Error code ÒERROR 4Ó may appear on the TV if the speed of the walking belt re-
mains below 1.0 mph when a higher speed setting is selected. Remove the key
from the console, wait for ten seconds, and then reinsert the key. If you weigh
over 200 pounds, it may be helpful to increase the incline of the treadmill. If the
error code appears again, please call our toll-free HELPLINE. Do not operate the
treadmill until the problem is corrected.
e. Error code ÒERROR 6Ó may appear on the TV when the console is first turned
on. Remove the key from the console, unplug the power cord, and wait for thirty
seconds. Plug in the power cord and reinsert the key. If the error code appears
again, please call our toll-free HELPLINE. Do not operate the treadmill until the
problem is corrected.
f. Error code ÒERROR 7Ó may appear on the TV when the console is first turned
on. Remove the key from the console, unplug the power cord, and wait for thirty
seconds. Plug in the power cord and reinsert the key. If the error code appears
again, please call our toll-free HELPLINE. Do not operate the treadmill until the
problem is corrected.
ERROR 4:
LOW SPEED HIGH PWM
CHECK USER MANUAL
ERROR 6:
CHECKSUM
CHECK USER MANUAL
ERROR 7:
RAMTEST
CHECK USER MANUAL
ERROR 3:
OVERSPEED
CHECK USER MANUAL
ERROR 2:
NO SPEED SIGNAL
CHECK USER MANUAL