Filter
Top Products
20
In addition to normal broadcast reception, the TV is
equipped to receive up to 125 cable channels (113 plus
12 TV channels). To use the TV with a cable TV sys-
tem, following the steps below.
1. Press the MENU button to
turn on the pop up menu.
Press the MENU button
again to select CH MEM-
ORY.
2. Press the + or Ð button to
move the arrow to
TV/CATV. Select
TV/CATV by pressing the
MENU button.
3. Press the MENU button to
cycle through the four
channel modes: (1) TV;
(2) STD (Standard) for
cable TV mode; (3) HRC
(Harmonic Related
Carrier) for cable TV sub-
scriber; (4) IRC (Incre-
mental Related Carrier) for cable TV subscriber.
Once the appropriate cable TV mode is selected, the
screen will return to normal after two seconds. Note:
Consult your cable company if you are not sure which
system you are using, or try different systems to obtain
the maximum number of channels.
To toggle between the TV mode and the cable TV mode,
press the TV/CATV button on the TV or the remote control.
To memorize cable TV channels, refer to CHANNEL
PROGRAMMING on pages 18 and 19.
CATV Channel Reference Table
Use the table below to find which CATV channel your
TV is displaying. The top row (in bold) represents the
channel number shown on the TV screen; the bottom
row represents the corresponding CATV channel.
Picture level controls are preset to nominal levels. If de-
sired, you can individually adjust the contrast, bright-
ness, color, or tint by following the steps below.
1. Press the ANALOG SE-
LECT button repeatedly to
select the attribute that you
want to adjust: contrast,
brightness, color, or tint.
2. Press the + or Ð button to adjust the level. Note: If
four seconds elapse without a button being pressed,
the display will return to the normal screen.
Press the TV/AV button on the TV or the remote control
to toggle between TV and VIDEO input.
The volume of the TV can be momentarily muted, if de-
sired, for a reason such as a telephone call. To mute
the volume, press the MUTE button. A bar on the TV
screen will indicate that the volume is at the minimum
level. To return the volume to the previous level, press
the MUTE button again or press the VOLUME + or Ð
button.
CABLE TV (CATV) OPERATION PICTURE LEVEL ADJUSTMENTS
SELECTING VIDEO INPUT
USING AUDIO MUTE
TV 07
CONTRAST
CH MEMORY
ANALOG
CLOCK/TIMER
AUTO MEMORY
SEARCH/SKIP
MEMORY ADD
¥ERASE
TV/CATV
1, 2 . . . . 6 . . . . 13, 14 . . . . 26 . . . . 36, 37 . . . . 50 . . . . 65,
5A, 2 . . . . 6 . . . . 13, A . . . . M . . . . W, W+1 . . W+14 . .W+29,
66 . . . . 75 . . . . 86 . . . . 94, 95 . . . . 99, 100 . . . . 112 . . . . 125
W+30. . W+39. . W+50. . W+58, A-5. . A-1, W+59 . . W+71 . . W+84