Filter
Top Products
32 Operating and Maintaining the P80 Console
To view TV Setting information:
1. Use the administrator code and password to view the
equipment settings.
2. Touch System Settings, then TV Settings.
Channel Configurations
There are two different ways to set up the TV channel
configurations for the P80 console. You can scan for available
channels or add channels manually.
Precor recommends that you set up one P80 console per
equipment type with channel definitions as well as channel
text, and then export those settings to your other P80
consoles. This method ensures that all P80 consoles in your
facility have the same configuration.
To scan for available channels:
1. Touch System Settings.
2. On the System Settings menu, touch TV Settings.
3. Touch Channel Guide, then SCAN.
The console scans available channels, and all available
channels appear on the screen.
Note: If there are analog channels missing from your list,
run an extensive scan to pick up missing channels or
channels with weaker signals.
To run an extensive scan:
1. Touch System Settings.
2. On the System Settings menu, touch TV Settings.
3. Touch Extensive Scan.
Note: This scan may take up to two hours to complete.
4. Touch On, then OK.
5. Touch Extensive Scan again.
On should still be selected.
6. Touch OK to begin extensive scan.