Filter
Top Products
Product Owner's Manual: Club Features 22
Selecting a U.S. Standard or Metric
Display
The equipment can display measurements in either Metric or U.S.
Standard. The default factory setting is U.S. Standard.
To change the display measurement:
1. At the SELECT UNITS prompt, press OK.
Use the navigational arrow keys to select a unit of measure (US
or METRIC).
CAUTION: If you change the Unit of Measure display on a
treadmill, be sure to check the speed setting to verify that it is
correct.
2. Press OK to accept the displayed setting and move to the next
feature.
Setting a Workout Session Time Limit
You can limit how long a user can exercise on the equipment. For
example, if you set the time limit to 20 minutes, users can only
enter a session time between 1 and 20 minutes.
Note: The automatic cool down period is appended to the end of
any time-based program, so adjust the time limit accordingly.
To set a maximum workout time:
1. At the SET MAX WORKOUT TIME prompt, press OK. Use the
navigational arrow keys to change the displayed time limit.
Note: When you press and hold a navigational arrow key, the
number increments by five, for example, 1, 5, 10, 15, 20. When
you tap an arrow key, the number increments by one.
2. When you have selected a maximum workout time, press OK to
accept the displayed setting and move to the next feature.
You can also let a user exercise indefinitely by selecting NO LIMIT.
If you choose the NO LIMIT setting, you will need to provide the
following instructions to your users.
To exercise without a time limit:
1. Select a program. The workout time appears in the display.
2. On the number keypad, type 240.
3. Press the UP arrow key to display NO LIMIT, and press OK.
The exercise session times available are between 1 and 240
minutes.