Filter
Top Products
536i Elliptical Fitness CrossTrainer Assembly Guide 11
Remove the foam pouch from the ramp.
Position the water bottle holder as shown in the illustration. Place
the top section over the handrail and align the two mounting
holes. Position the base below the handrail and align the slits and
mounting pems with the top section. Slide the base into the top
section and secure it using three Phillips-head screws (F) and a
Phillips screwdriver.
Place the display covers (N) around the console bracket. Insert
two buttonhead screws (L) and wrench tighten.
Make sure the top cover’s front edge is flush with the display
console bracket before you secure it to the bottom cover.