Filter
Top Products
Owner’s Manual: Advanced Programming and Troubleshooting 25
Advanced Programming and Troubleshooting
Certain features remain hidden and can only be accessed
using special key presses. Read this section if you are
interested in learning how to:
• Change the display to U.S. standard or Metric
• View the odometer
• Display the number of hours you have used your
treadmill
• View the model and software version
Programming Tips
• You have a 2-second window to access diagnostics
mode. You may want to ask another adult for help. When
you turn the treadmill ON, all the LEDs on the display
light for two seconds. During this 2-second period, you
need to press the appropriate keys quickly and without
pause.
• Always start at the PRESS QUICKSTART OR
PROGRAM banner prompt.
• Use the SELECT/ENTER, QUICKSTART, and ▼▲ keys
while in the diagnostics mode.
• Exit the diagnostics mode by pressing the HOLD TO
RESET key for two or more seconds.
Selecting a U.S. Standard or
Metric Display
The treadmill can display measurements in either METRIC
or U.S. STANDARD. The default factory setting is set to
display U.S. STANDARD. To change this setting, perform
the following steps:
1. Turn the treadmill OFF and ON.
2. Within two seconds, press the following keys in
sequence without hesitating:
STOP, INCLINE ▲, SPEED ▼
3. The current unit of measure (MILES or KM) appears in
the center display. If you wish to use U.S. standard
settings, select MILES. If you prefer Metric settings,
select KM.
Any ▼ or ▲ key lets you alternate between the prompts.
Note: Changing the display to Metric measurements
affects the default settings. Distances and the odometer
value are converted to and appear in kilometers (KM).
Speed appears in kilometers per hour. If you use
QUICKSTART, the weight is set at 68 kg.
UGuide_A4.book Page 25 Wednesday, February 27, 2008 3:36 PM