Filter
Top Products
Owner’s Manual: Display Console 13
Keypad
Use the keypad to enter your workout session selections.
The following information explains the different uses of the
keys from left to right. To locate each key, look at the
display console or refer to the diagram on this page.
PROGRAM/SELECT: This key has two functions:
• It lets you select a program during setup.
• When you have started exercising, it acts as a
toggle between the DISTANCE and CALORIES
display.
INCLINE ▲▼:
Press and hold the INCLINE arrows to increase or
decrease the incline from 0% to 15% in 0.5%
increments.
During your workout, to view your current incline, tap
either INCLINE ▲ or ▼ key. To change the incline,
press the arrow key for more than one second.
Changes to the incline are not immediate. It takes
time for the lift to reach the target incline shown on
the display.
The incline setting affects the column height in the
program profile as shown in Diagram 6.
The height of the column indicates the level of incline.
Diagram 6: Column height affected by changes in incline
During the setup phase, pressing the INCLINE arrow
keys will not affect the incline. However, the arrow
keys do not affect what appears on the display. Refer
to Selecting a Program.
0 to 1
4 to 5
6 to 7
8 to 9
10 to 11
12 to 13
14 to 15
2 to 3
UGuide_A4.book Page 13 Wednesday, February 27, 2008 3:36 PM