Filter
Top Products
25
or
1. On your mobile device, open Flow app and sign in with your Polar account.
2. Wait for the Connect product view to appear on your mobile device (Waiting for V800) is displayed.
3. On V800, go to Settings > General settings > Pair and sync > Pair and sync mobile device and
press START
4. Press START, Connecting to device is displayed, followed by Connecting to app.
5. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on your
V800.
6. Pairing completed is displayed when you are done.
DELETE A PAIRING
To delete a pairing with a sensor or mobile device:
1. Go to Settings > General settings > Pair and sync > Paired devices and press START.
2. Choose the device you want to remove from the list and press START.
3. Delete pairing? is displayed, choose Yes and press START.
4. Pairing deleted is displayed when you are done.
SYNCING
You can transfer data from your V800 via the USB cable with FlowSync software or wirelessly via Bluetooth
Smart® with the Polar Flow app. To be able sync data between your V800 and the Flow web service and app,
you need to have a Polar account and FlowSync software. Go to flow.polar.com/start, and create your Polar
account in the Polar Flow web service and download and install FlowSync software onto your PC. Download
Flow app onto your mobile from the App Store or Google Play.
Remember to sync and keep your data up-to-date between your V800, the web service and the mobile app
wherever you are.
SYNC WITH FLOW APP
Before syncing make sure:
l You have a Polar account and Flow app
l You have registered your V800 in the Flow web service and synced data via FlowSync software at
least once.
l Your mobile device has Bluetooth turned on, and airplane mode/flight mode is not turned on.
l You have paired your V800 with your mobile. For more information , See "Pairing" on page 23
There are two ways to sync your data: